F
FitsMyRig

Wheels for your Tank 500

Step 1 — your bolt pattern. Step 2 — every wheel brand. Step 3 — which of those brands ship a wheel that bolts on. We do step 1 once and run step 3 against the catalog. Step 2 is in the rejected list at the bottom; nothing is hidden.

Bolt pattern

6x139.7

Hub bore

110 mm

Factory offset

+30 mm

Safe offset window

-35…+10 mm Δ

9 wheels in the catalog bolt straight on (4 brands). 189 more are reachable with a bolt adapter. 646 wheels have no fitment path.

6 matched wheels need a hub-centric ring (wheel bore wider than your hub) — see callouts below and buy from any reputable brand.

Hub-centric rings needed for some wheels

Your hub bore (110mm) is narrower than those wheels' center bore. A hub-centric ring fills the gap so the wheel sits centred on the hub rather than floating on the studs. They're cheap (~$5–20/set), press-fit, and widely available.

Black Rhino

1 matching SKUs

Black Rhino Wheels

6 matching SKUs

Fuel Off-Road

1 matching SKUs

KMC

1 matching SKUs

Reachable with a bolt adapter

These wheels don't match your bolt pattern directly, but a hub-centric bolt adapter bridges the gap. Adapters also add track width (typically 20–50 mm per side). Only adapters from established brands are shown here — don't use unbranded hardware.

🔩

Bolt adapter required: 6x139.76x135

Lets Toyota/Patrol/Hilux/Ranger hubs run F-150 Gen-4+ (6×135) wheels.

131 wheels available with this adapter

Showing first 30 of 131. Filter by bolt pattern on a brand page to narrow.

🔩

Bolt adapter required: 6x139.75x150

Cross-lug adapter — runs Tundra/Lexus LX 5×150 wheels on a 6-lug hub. Verify load rating.

58 wheels available with this adapter

Showing first 30 of 58. Filter by bolt pattern on a brand page to narrow.

No fitment path (646)

show all

These wheels use bolt patterns for which no reputable adapter exists to bridge your hub. Nothing hidden — we list them so you can verify.