F
FitsMyRig

Wheels for your 1500

Step 1 — your bolt pattern. Step 2 — every wheel brand. Step 3 — which of those brands ship a wheel that bolts on. We do step 1 once and run step 3 against the catalog. Step 2 is in the rejected list at the bottom; nothing is hidden.

Bolt pattern

5x139.7

Hub bore

77.8 mm

Factory offset

+18 mm

Safe offset window

-25…+10 mm Δ

24 wheels in the catalog bolt straight on (4 brands). 103 more are reachable with a bolt adapter. 717 wheels have no fitment path.

1 matched wheel need a hub-centric ring (wheel bore wider than your hub) — see callouts below and buy from any reputable brand.

Hub-centric rings needed for some wheels

Your hub bore (77.8mm) is narrower than those wheels' center bore. A hub-centric ring fills the gap so the wheel sits centred on the hub rather than floating on the studs. They're cheap (~$5–20/set), press-fit, and widely available.

Fuel Off-Road

2 matching SKUs

KMC

2 matching SKUs

  • KMC XD820 Grenade 15x5.5 -22 (5x139.7 Jimny)

    15×5.5″ · -22mm offset · 5x139.7

    Δ -40mm
    all-purpose8 kg

    Wheel bore is wider than your hub — needs a hub-centric ring. See brands above.

    Offset is 40mm more outboard than factory — expect rubbing or fender trim work.

    from $141/wheelView KMC
  • KMC XD820 Grenade 18x9 -12 (5x139.7)

    18×9″ · -12mm offset · 5x139.7

    Δ -30mm
    rock13 kg

    Offset is 30mm more outboard than factory — expect rubbing or fender trim work.

    from $209/wheelView KMC

Method Race Wheels

19 matching SKUs

Pro Comp Wheels

1 matching SKUs

Reachable with a bolt adapter

These wheels don't match your bolt pattern directly, but a hub-centric bolt adapter bridges the gap. Adapters also add track width (typically 20–50 mm per side). Only adapters from established brands are shown here — don't use unbranded hardware.

🔩

Bolt adapter required: 5x139.75x127

Adapts Toyota 5-lug hubs to run Jeep / GM 5×127 wheels.

82 wheels available with this adapter

Showing first 30 of 82. Filter by bolt pattern on a brand page to narrow.

🔩

Bolt adapter required: 5x139.75x114.3

Lets Toyota 5-lug hubs run the very common 5×114.3 bolt pattern (Nissan, Mitsubishi, Honda).

Buy from:H&RMcGard

21 wheels available with this adapter

No fitment path (717)

show all

These wheels use bolt patterns for which no reputable adapter exists to bridge your hub. Nothing hidden — we list them so you can verify.